A & A Flooring Supplies Inc.

Floor Covering Services

  • Home
  • About us
  • Products
    • Hardwood
    • Engineered Hardwood
    • Laminate
    • Luxury Vinyl
    • Carpet
  • Services
    • Inspection and Consulting
    • Installation
    • Sanding
    • UV Coating
  • Knowledge Centre
  • Gallery
  • Contact
  • 416 736 0089

Powered by Genesis

UV Coating for wood floor is the way to achieve a cured floor at the speed of light

August 5, 2018 by Amir Leave a Comment

UV Coating is gaining ground very fast as more and more people realise that factory  finished technology is now available at your door step. The beauty of UV Coat is not only that cure sat the speed of light but you cam also same high quality and strength in the finish that factories offer such as Aluminium Oxide or Ceramic. These finishes are water base very very low in V.O.C. and therefor very odours and because the finish is cured … [Read more...]

Filed Under: General

Wood Flooring Installation Mistakes

July 18, 2018 by Amir Leave a Comment

Installing wood floor isn’t rocket science, but needs attention and diligence and if you don't follow the guide, there’s a lot that can go wrong. Most of the problems are preventable with a little care on the part of the installer. These are most common mistakes made when installing wood floors. Remember rule #1, always read and follow installation guideline supplied by a manufacturer. Storage & Acclimation Is very important where you store … [Read more...]

Filed Under: General

What to Do With a Wet Concrete Slab

June 18, 2018 by Amir Leave a Comment

What to Do With a Wet Concrete Slab The construction industry has long been judged on its quality of work and ability to complete projects on schedule. One challenge often faced: a concrete slab with elevated moisture levels. The long time it takes for concrete slabs to dry can create delays, and of the various building materials, concrete can be one of the most vexing sources of moisture. Under average ambient conditions, a concrete slab poured … [Read more...]

Filed Under: General

Subfloor for Engineered Floors

May 18, 2018 by Amir Leave a Comment

 What kind of subfloor should be used for engineered hardwood flooring?  Engineered hardwood flooring is versatile and could be installed on different subfloors. Many of engineered hardwood floors are manufactured with three or five-ply. This helps the engineered floor to perform better than solid wood in presence of  moisture, making it a better choice in places such as humid regions, that usually are less than ideal for solid wood. Engineered … [Read more...]

Filed Under: General